Neodymium D36mm Hose Clamp P-Clip Magnet | Rubber Lined | ID16mm | Pull Force 41kg

The Neodymium D36mm Hose Clamp P-Clip Magnet | Rubber Lined | ID16mm | Pull Force 41kg is a powerful magnetic hose, pipe and cable mounting solution designed for removable attachment to compatible ferromagnetic steel surfaces. Combining a 36mm diameter neodymium magnetic base with a rubber-lined P-clip featuring a 16mm internal diameter, this assembly provides a convenient way to support and route compatible hoses, pipes, cables and conduit without permanently drilling or welding into the supporting steel structure.

The magnetic base incorporates high-performance Neodymium Iron Boron (NdFeB) rare earth magnetic material and provides a specified 41kg pull force under applicable test conditions. The rubber-lined P-clip helps cushion the supported component, reduce direct metal-to-metal contact and provide a secure interface for compatible cylindrical components.

This removable magnetic clamp is particularly suited to industrial machinery, manufacturing equipment, workshops, hydraulic and pneumatic systems, cable management, maintenance, prototyping and OEM applications where routing points may need to be installed, adjusted or repositioned.

Key Features

• 36mm diameter neodymium magnetic base
• 16mm internal diameter P-clip
• Rubber-lined clamp
• Specified 41kg magnetic pull force
• Neodymium Iron Boron (NdFeB) rare earth magnet
• Designed for compatible hoses, pipes, cables and conduit
• Removable and repositionable magnetic mounting
• No drilling or welding into the supporting steel required
• Rubber lining helps cushion the supported component
• Helps reduce direct metal-to-metal contact
• Permanent magnetic operation
• No electricity or batteries required
• Suitable for compatible ferromagnetic iron and steel surfaces

Common Applications

• Hose routing and support
• Hydraulic lines
• Pneumatic lines
• Pipe mounting
• Cable management
• Electrical wiring
• Wiring looms
• Conduit support
• Industrial machinery
• Manufacturing equipment
• Workshop installations
• Maintenance and repair
• Temporary equipment setups
• Prototyping
• OEM magnetic assemblies

16mm Internal Diameter P-Clip

The integrated P-clip has a specified 16mm internal diameter (ID) and is designed to support compatible hoses, pipes, cables and other cylindrical components.

Potential uses include:

• Hoses
• Hydraulic and pneumatic lines
• Pipes and tubing
• Electrical cables
• Wiring looms
• Flexible conduit

Always check the actual outside diameter of the item being supported. A hose or pipe described by a nominal size does not necessarily have a 16mm external diameter.

Correct clamp fit is important for secure routing without excessive compression of the supported component.

Rubber-Lined Hose Clamp

The P-clip incorporates a rubber lining that creates a cushioned interface between the clamp and the hose, pipe or cable.

Depending on the application, this lining can help:

• Reduce direct metal-to-metal contact
• Cushion the supported component
• Reduce abrasion against the clamp
• Improve grip
• Accommodate vibration and minor movement
• Protect compatible hose and cable surfaces

The rubber lining should be periodically inspected for wear, cracking or deterioration, particularly in applications involving heat, oils, chemicals, vibration or continuous movement.

Compatibility of the rubber lining with the specific operating environment should be confirmed before installation.

36mm Neodymium Magnetic Base

The 36mm diameter magnetic base provides removable attachment to suitable ferromagnetic steel surfaces.

Neodymium Iron Boron is a powerful rare earth permanent magnetic material that provides strong magnetic attraction relative to its size.

For optimum practical holding performance, the magnetic working face should make close, flat contact with clean and sufficiently thick ferromagnetic steel.

This allows hose, cable and pipe mounting points to be added to suitable machinery and steel structures without permanently modifying the supporting surface.

41kg Pull Force

The magnetic base has a specified 41kg pull force.

This figure describes magnetic pull performance under defined test conditions. It should not be interpreted as a 41kg safe working load or as the maximum weight that the complete P-clip assembly can support in every installation.

Practical holding performance can be affected by:

• Steel thickness
• Steel composition
• Surface flatness
• Paint and protective coatings
• Rust
• Dirt and contamination
• Air gaps
• Mounting orientation
• Shear forces
• Vibration
• Dynamic movement
• Hose or cable tension
• Leverage

The complete installation should therefore be assessed rather than relying solely on the magnetic pull-force figure.

Removable and Repositionable Mounting

The magnetic base allows the P-clip to be installed on compatible steel without drilling, welding or permanently altering the supporting structure.

This can be useful for:

• Temporary hose routing
• Prototype machinery
• Equipment testing
• Retrofit installations
• Frequently reconfigured production equipment
• Temporary cable management
• Maintenance work
• Machinery modifications

The clamp can be relocated as routing requirements change, provided a suitable ferromagnetic mounting surface is available.

Direct Pull vs Shear Loads

Magnetic pull-force measurements generally represent a specific direct-pull test arrangement.

When the magnet is installed vertically, the supported hose or cable may instead apply a downward shear or sliding force.

Practical magnetic holding under shear can be considerably lower than direct pull.

Hoses, cables and pipes may also create sideways, peeling or leverage forces depending on how they are routed.

For this reason, the specified 41kg pull force should not be treated as a 41kg vertical holding capacity or safe working load.

Vibration and Dynamic Loads

Hose and cable installations can generate dynamic forces that are not present during a static magnetic pull test.

These may include:

• Machinery vibration
• Hydraulic pressure changes
• Pneumatic movement
• Hose flexing
• Cable movement
• Thermal expansion
• Fluid movement
• Equipment startup and shutdown
• Accidental pulling
• Mechanical impact

These conditions should be considered when determining the positioning, spacing and number of magnetic P-clips required.

Where accidental movement or detachment could create a hazard, appropriate secondary mechanical retention should be considered.

How Does the Magnetic P-Clip Work?

This magnetic mounting assembly combines two primary functions:

1. The 36mm neodymium magnetic base attaches to compatible ferromagnetic steel.
2. The 16mm ID rubber-lined P-clip supports and routes the compatible hose, pipe, cable or conduit.

This creates a removable support point that can be positioned on suitable steel machinery or equipment without drilling into the mounting surface.

When routing requirements change, the assembly can be removed and repositioned.

Technical Specifications

• Product Type: Neodymium Magnetic Hose Clamp / P-Clip Magnet
• Alternative Names: Magnetic P-Clip, Magnetic Hose Clamp, Magnetic Pipe Clamp, Magnetic Cable Clamp, Magnetic Hose Mount
• Magnetic Material: Neodymium Iron Boron (NdFeB)
• Magnet Type: Rare Earth Permanent Magnet
• Magnetic Base Diameter: 36mm
• Clamp Type: P-Clip / Hose Clamp
• P-Clip Internal Diameter: 16mm
• Clamp Lining: Rubber
• Pull Force: 41kg
• Magnetic Operation: Permanent
• Power Required: None
• Target Mounting Surface: Compatible ferromagnetic iron and steel
• Primary Function: Removable support and routing for compatible hoses, pipes, cables and conduit

Industrial and Engineering Applications

The combination of a powerful neodymium magnetic base and rubber-lined P-clip makes this assembly suitable for a range of industrial environments.

Potential users and applications include:

• Manufacturing facilities
• Mechanical workshops
• Industrial automation
• Hydraulic systems
• Pneumatic equipment
• Machinery maintenance
• Electrical installations
• Production lines
• Equipment manufacturers
• Engineering workshops
• Prototyping
• OEM equipment

Its removable magnetic mounting system is particularly useful where permanent drilling or welding is undesirable.

Installation Considerations

Before installation:

• Confirm the target surface is ferromagnetic
• Clean the magnetic face and target steel
• Maximise flat contact between the magnet and steel
• Measure the actual outside diameter of the supported component
• Confirm compatibility with the 16mm ID P-clip
• Avoid excessive compression of hoses or cables
• Consider the direction of applied forces
• Account for vibration and movement
• Consider hose, pipe or cable tension
• Periodically inspect the magnetic base, P-clip and rubber lining

For safety-critical or high-vibration installations, appropriate secondary retention should be incorporated where required.

Please Note

This product combines a 36mm diameter neodymium magnetic base with a rubber-lined P-clip featuring a 16mm internal diameter. The magnet has a specified 41kg pull force.

The 41kg pull force is a magnetic test value and is not a 41kg safe working load, vertical holding capacity or rated hose-support capacity. Actual performance depends on steel thickness, surface condition, contact area, coatings, air gaps, load direction, leverage, vibration and dynamic forces.

Always confirm the actual outside diameter of the hose, pipe, cable or conduit before installation rather than relying solely on nominal sizing.

A specific neodymium grade, coating, rubber composition, maximum operating temperature and dimensional tolerance have not been supplied and should not be assumed.

Where vibration, movement or dynamic loads are present, assess the complete installation and use suitable secondary mechanical retention where accidental detachment could cause injury or equipment damage.

Neodymium magnets are powerful and inherently brittle. Avoid uncontrolled impacts and keep strong magnets away from children, pacemakers and other medical implants, magnetic storage media and sensitive electronic equipment.