Male Thread Neodymium Pot Magnet – 10mm Diameter x 14mm

The Male Thread Neodymium Pot Magnet – 10mm Diameter x 14mm is a compact rare earth threaded mounting magnet designed for removable holding, positioning and attachment to compatible ferromagnetic steel surfaces. Featuring a 10mm diameter magnetic base, a 14mm overall dimension and an integrated male threaded connection, this small pot magnet is well suited to applications where installation space is limited.

The magnetic assembly incorporates high-performance Neodymium Iron Boron (NdFeB) permanent magnetic material within a steel pot housing. The steel pot helps protect the brittle neodymium magnet while directing and concentrating magnetic flux towards the active working face.

The protruding male thread allows the magnetic base to be connected to compatible female-threaded components, brackets, fixtures and custom assemblies. This combination makes the magnet suitable for industrial equipment, signage, displays, sensors, small fixtures, manufacturing and OEM magnetic mounting applications.

Key Features

• 10mm diameter neodymium pot magnet
• 14mm overall dimension
• Integrated male threaded connection
• Compact threaded magnetic mounting solution
• Neodymium Iron Boron (NdFeB) rare earth magnet
• Steel pot / cup housing
• Steel housing helps concentrate magnetic flux towards the working face
• Removable and repositionable attachment
• No electricity or external power required
• Suitable for compatible ferromagnetic iron and steel
• Ideal for compact equipment and space-restricted applications

Common Applications

• Small industrial fixtures
• Sensor mounting
• Signage and displays
• Equipment accessories
• Compact machinery
• Product assemblies
• Removable brackets
• Lighting components
• Workshop fixtures
• Manufacturing equipment
• Prototyping
• OEM magnetic assemblies
• Custom magnetic mounting systems

Compact 10mm Magnetic Base

With a magnetic base measuring just 10mm in diameter, this neodymium pot magnet is designed for applications where a larger magnetic mounting solution may be impractical.

The compact footprint can be useful for:

• Small equipment
• Narrow mounting locations
• Compact fixtures
• Product housings
• Display systems
• Sensor installations
• Custom mechanical assemblies

Its small size allows a magnetic mounting point to be incorporated into equipment while minimising the space occupied by the magnetic base.

Male Threaded Connection

The integrated male thread provides a convenient mechanical connection for attaching the magnetic base to a compatible female-threaded component.

Potential mating components can include:

• Threaded brackets
• Female-threaded fixtures
• Couplings
• Equipment components
• Custom fabricated parts
• Threaded mounting points

This allows the pot magnet to become part of a larger mechanical assembly while retaining the benefits of removable magnetic attachment at the working face.

A specific male thread size and thread length have not been supplied and should be confirmed before selecting mating hardware.

How Does a Neodymium Pot Magnet Work?

A neodymium pot magnet combines a powerful rare earth permanent magnet with a steel pot or cup housing.

The steel housing helps redirect and concentrate the magnetic field towards the exposed working face. It also provides mechanical protection around the neodymium magnetic material.

This construction makes pot magnets particularly useful where magnetic attraction is primarily required from one side of the assembly.

For strongest practical holding performance, the active magnetic face should make close, flat contact with suitable ferromagnetic steel.

Neodymium Rare Earth Magnetic Performance

This pot magnet incorporates Neodymium Iron Boron (NdFeB), a high-performance rare earth permanent magnetic material known for producing strong magnetic fields relative to its size.

This makes neodymium particularly useful for compact magnetic mounting solutions where available space is limited.

As a permanent magnet, it requires:

• No batteries
• No charging
• No electrical wiring
• No external power supply

The magnetic field remains continuously active.

Removable Magnetic Mounting

When attached to a suitable steel surface, this pot magnet can provide a removable and repositionable mounting point.

This can eliminate the need to drill or weld into the supporting steel in suitable applications.

Potential benefits include:

• Fast installation
• Easy repositioning
• Temporary mounting
• Reconfigurable fixtures
• Reduced permanent modification of equipment
• Convenient prototyping

The suitability of magnetic mounting should always be assessed according to the load, mounting orientation and consequences of accidental detachment.

Magnetic Holding Performance

Actual magnetic holding performance depends on the complete magnetic circuit and installation conditions.

Important factors include:

• Steel thickness
• Steel composition
• Surface flatness
• Available contact area
• Paint and coatings
• Rust or contamination
• Air gaps
• Direction of applied force
• Vibration
• Movement
• Leverage from attached components

A specific pull force or Gauss rating has not been supplied for this product. Maximum holding capacity should therefore not be inferred from the 10mm diameter or neodymium construction.

Direct Pull vs Shear Loads

Magnetic holding is generally strongest when the applied force acts perpendicular to the magnetic working face.

When the magnet is mounted on a vertical steel surface and the attached component applies a downward force, the assembly experiences shear or sliding forces.

Practical holding performance in shear can be considerably lower than direct-pull performance.

Components attached to the male thread can also create leverage or torque, particularly if they extend away from the mounting surface.

Compatible Magnetic Surfaces

This neodymium pot magnet is intended for use with suitable ferromagnetic iron and steel surfaces.

Compatible surfaces may include:

• Mild steel
• Iron
• Magnetic steel brackets
• Steel machinery
• Ferromagnetic equipment housings

It will not magnetically attach to aluminium, copper, brass, plastic, timber or glass. Many grades of stainless steel also provide little or no magnetic attraction.

Always verify that the intended mounting surface is sufficiently magnetic before installation.

Technical Specifications

• Product Type: Male Thread Neodymium Pot Magnet
• Alternative Names: Male Threaded Pot Magnet, Threaded Neodymium Magnet, Rare Earth Mounting Magnet, Male Thread Magnetic Base
• Magnetic Material: Neodymium Iron Boron (NdFeB)
• Magnet Type: Rare Earth Permanent Pot Magnet
• Magnetic Base Diameter: 10mm
• Overall Dimension: 14mm
• Thread Type: Male / External
• Housing: Steel Pot / Cup
• Power Requirement: None
• Target Surface: Compatible ferromagnetic iron and steel
• Primary Function: Magnetic mounting, holding and positioning
• Typical Applications: Compact fixtures, machinery, equipment, displays and OEM assemblies

Industrial and OEM Applications

The compact 10mm magnetic base and male threaded connection make this pot magnet suitable for integrating magnetic attachment into small products and equipment.

Potential users include:

• Manufacturers
• Equipment builders
• Mechanical engineers
• Product designers
• Fabricators
• Automation specialists
• Signage manufacturers
• OEM manufacturers

Its compact dimensions are particularly useful where a removable magnetic attachment point is required without using a large magnetic base.

Installation Considerations

Before installation:

• Confirm the target surface is ferromagnetic
• Clean the magnetic face and target steel
• Maximise flat surface contact
• Confirm the male thread size before selecting mating components
• Ensure appropriate thread engagement
• Avoid overtightening
• Consider load direction
• Account for leverage from attached components
• Consider vibration, shock and dynamic movement

Where accidental detachment could cause injury or equipment damage, appropriate secondary mechanical retention should be considered.

Please Note

This product has a 10mm diameter magnetic base, a supplied 14mm overall dimension and a male threaded connection.

No specific male thread size, thread length, neodymium grade, coating, pull force, Gauss rating, dimensional tolerance or maximum operating temperature has been supplied and these specifications should not be assumed.

Actual magnetic holding performance depends on the target steel, steel thickness, contact area, surface condition, air gaps, mounting orientation, leverage and dynamic forces.

Neodymium magnetic material is inherently hard and brittle. Avoid uncontrolled impacts and do not drill, cut or machine the magnetic material.

Do not use this pot magnet for lifting people, hazardous overhead suspension or safety-critical load retention unless the complete system has been appropriately engineered, tested and rated.

Keep strong neodymium magnets away from children, pacemakers and other medical implants, magnetic storage media and sensitive electronic equipment.